How to Install a TV Without Damaging the Wall

0
2462

Table of Contents

Hours of riveting movies and enthralling TV shows await you on your new television. Before you dive into the entertainment, though, you may need to figure out how to mount your TV on the wall. Installing a TV on your own is a much cheaper alternative to hiring a professional, and it’s not nearly as intimidating as it seems. With the right tools and a bit of patience, you can kick back and enjoy everything your new TV has to offer sooner than you expect. If you’re looking for some tips to help you get started, you’ve come to the right place. Follow these simple guidelines to mount your TV on the wall without causing any damage.

How to Install a TV Without Damaging the Wall

Choose the Right Spot

Before you get to work, take some time to choose the optimal place to install your TV. The ideal spot on your wall should be able to support the weight of the TV without any trouble. In addition to selecting the right spot for installation, be sure to choose a quality TV bracket. The bracket’s job is to handle the full weight of the TV so that your unit doesn’t come crashing down. Make sure you carefully pick out a quality TV bracket to ensure that your unit stays firmly in place.

Other key points to consider are the type of wall you have and the proper positioning of the TV. Certain materials, such as cement and brick, may pose a challenge during the installation process. Additionally, check if there is any plumbing on the other side of the wall you choose. Plumbing may create problems when you mount your TV, so be careful when choosing a spot on your wall. Once you’ve decided on the perfect place, it’s time to focus on positioning. Whether you have a couch or bed across from your TV, make sure that the unit is at eye level when you sit down in front of the TV. This is crucial to your comfort and convenience while watching a movie or TV show.

Prepare the Measurements

Unless you prefer having a lopsided TV on your wall, it’s well worth your time to nail the measurements before installing your unit. After selecting an area of the wall that’s free of obstructions, place some tape over the spot where you intend to mount your TV. This will serve as a visual reminder of where you want your unit to be. In addition, be sure to measure your TV and TV bracket accurately to ensure that you don’t make any errors during the installation process. It can be tedious to work out all the measurements, but taking this step will prevent you from running into trouble later on, which may lead to costly repairs and replacements.

Choose the Right Stud Finder

A stud finder is one of the most essential tools that you need to install your TV without damaging the wall. Stud finders are small handheld devices that are used to locate framing studs behind drywall. Initially, these devices were only good for identifying the general location of a stud. However, stud finders have evolved to pinpoint the various characteristics of a stud, such as its edges and center. Finding the best stud finder for your needs can simplify the TV installation process for you significantly.

To use a stud finder, start by moving the device horizontally across the wall. When the finder has located a stud, you will see a light turn on. You can then continue to move the device back and forth along the indicated area to determine the exact parameters of the stud. Once you’ve found the studs you need to do your job, verify that the distance between them is approximately 16-24 inches long. A measurement that is much higher or lower than this range may indicate that the studs you found are pipes or other blockages.

Install the TV Bracket

Finding studs behind drywall enables you to begin the next step, which is installing the TV bracket. Before you mount the bracket, make sure to pre-drill holes into each stud. This helps to ensure that your TV will stay securely in place once you install it. Next, position your bracket so that it’s even and use the best cordless drill to drill each screw in tightly. Keep in mind that your TV bracket is the foundation of your TV set, so it should appear completely straight and even.

Mount Your TV

It’s the moment you’ve been waiting for—you can finally mount your TV. It goes without saying, but be as careful as possible while lifting your TV and placing it onto the bracket. You’ve worked hard up to this point, and you don’t want all of your effort to go to waste. Ask a friend or family member to help you out during this step if you feel that you can’t do it on your own.

Now, use a screwdriver to screw the mount onto the back of the TV. Take the time to confirm that each screw is properly adjusted and tightened before you complete this final step. Once you’ve double-checked to make sure that everything is in place, walk away and take a look at your TV from farther away. If everything looks straight and even, congratulations! You’ve successfully installed a TV while keeping your wall intact. Feel free to celebrate by sitting back and watching all of your favorite movies and TV shows.

Install Your New TV Like a Pro

Mounting your new TV unit like a professional may seem like a challenge, but it can be done if you have the right tools and strategies up your sleeve. Not only does mounting a TV on your own help you save money, but it also gives you a personal sense of accomplishment that you can savor as you enjoy your new TV. Keep these tips in mind and impress everyone you know with your top-notch handyman abilities. They may even ask you to help them mount their own TV!

LEAVE A REPLY

Please enter your comment!
Please enter your name here